| No. | Brand | b | d | T | E | k | R | V | Q |
| HH840249/HH84021 | Timken | - | - | - | - | - | - | - | - |
| 25580/2552 | Timken | - | - | - | - | - | - | - | - |
| JH211749/JH21171 | Timken | - | - | - | - | - | - | - | - |
| HH421246C/HH42121 | Timken | - | - | - | - | - | - | - | - |
| 655/653 | Timken | - | - | - | - | - | - | - | - |
| HM237545/HM23751 | Timken | - | - | - | - | - | - | - | - |
| LM67048/LM6701 | Timken | - | - | - | - | - | - | - | - |
| 78250/78551 | Timken | - | - | - | - | - | - | - | - |
| LM48548/LM4851 | Timken | - | - | - | - | - | - | - | - |
| LL481448/LL481411 | Timken | - | - | - | - | - | - | - | - |
| 9386H/9321 | Timken | - | - | - | - | - | - | - | - |
| JH217249/JH21721 | Timken | - | - | - | - | - | - | - | - |
| 496/493 | Timken | - | - | - | - | - | - | - | - |
| HM903249/HM90321 | Timken | - | - | - | - | - | - | - | - |
| LM48548/LM4851 | Timken | - | - | - | - | - | - | - | - |
| X32009X/Y32009X | Timken | - | - | - | - | - | - | - | - |
| 98350/98788 | Timken | - | - | - | - | - | - | - | - |
| EE217062X/217112 | Timken | - | - | - | - | - | - | - | - |
| L865547/L865512 | Timken | - | 447.675 mm | - | - | - | - | - | - |
| EE380875/38019 | Timken | - | - | - | - | - | - | - | - |
| 34301/34478 | Timken | - | - | - | - | - | - | - | - |
| HH932145/HH93211 | Timken | - | 1.3125 in | - | - | - | - | - | - |
| JM734449A/JM73441 | Timken | - | 9.0000 in | - | - | - | - | - | - |
| 28584/28521 | Timken | - | - | - | - | - | - | - | - |
| L44643/L4461 | Timken | - | - | - | - | - | - | - | - |
| JLM104948/JLM10491 | Timken | - | 150 mm | - | - | - | - | - | - |
| 755/752 | Timken | - | - | - | - | - | - | - | - |
| H238140/H23811 | Timken | - | - | - | - | - | - | - | - |
| NP118297/NP422278 | Timken | - | - | - | - | - | - | - | - |
| LL778149/LL77811 Timken Tapered Roller Bearings | Dimension F:9.97 in; Shaft Tolerance:0.0030 in; Dimension L:4.49 in; Dimension RV:0.36 in; Y1 - Geometry Factor:2.55; Dimension H:1.50 in; Dimension N:4.060 in; Dimension L Fix:4.49 in; C0 - Static Load:147000 lb; Pre Install Clearance Max:0.0055 in; Dimension BC:10.96 in; Grease Lubrication - T Seal:1200 rpm; Oil Lubrication - B/C/O Seal:600 rpm; Eng Internal Radial Clearance - Min:0.0053; Float:0.083 in; |
| LM11749/LM1171 Timken Tapered Roller Bearings | Shaft Diameter d:1 3/4 in; C1 Dynamic Load Rating:163; G:M16; Seal:LO610/ 1-3/4; J:210.00 mm; Material :Cast Iron; Housing Mass:5.30 Kg; Max Oil Speed:5900; End Cover2:EC512-610; Adapter Sleeve1:HE310; Locating Rings (width x OD):SR110X10.5; Seal Type:Labyrinth; Bearing:21310K; H2:30 mm; Jmax:215 mm; H:134 mm; H1:70.0 mm; Max Grease Speed:4900; C0 Static Load Rating:151; N1:24.00 mm; |
| HM535347/HM53531 Timken Tapered Roller Bearings | Dp:575 mm; Thread D11:Tr530x6; Bn:80 mm; Weight:74.30 Kg; Suitable Lockplate No.:MS 31/530; s:40 mm; i:30 mm; Tapped Hole Threads:M16; D4:610 mm; T:23 mm; D3:670 mm; |
| 74500/7485 Timken Tapered Roller Bearings | Cover Length C1:1.095 in; Type:Open; Number of Bolts:4; Cover Diameter A:3.345 in; |
| EE114080/11416 Timken Tapered Roller Bearings | Appropriate Hydraulic Nut:HMV16; d1:70.00 mm; C:17 mm; Weight:1.28 Kg; Lockwasher and Lockplates:MB16; Thread G:M80x2; L:78.00 mm; Locknut:KM16; D3:105 mm; |
| 496/493 Timken Tapered Roller Bearings | Dimension D:5.190 in; Shaft Size :2-1/4 in; Dimension RA:0.15 in; Eng Internal Radial Clearance - Min:0.0016; Dimension E:4.50 in; Dimension F:5.88 in; Grease Lubrication - M/N Seal:2200 rpm; Dimension C:3.25 in; Dimension L Fix:3.28 in; C - Dynamic Load (Basic):31400 lb; Weight:14 lb; Dimension KA:1.13 in; Y2 - Geometry Factor:4.08; UPC Code:0883450039802; Dimension J (Bolt Size):0.625 in; |
| 39590/39521 Timken Tapered Roller Bearings | R - Cone Backface To Clear Radius3:0.25 in; da - Cone Frontface Backing Diameter:11.3 in; Series:275000; d:10.5 in; Cone Part Number:EE275105; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:396000 lbf; Cg - Geometry Factor:0.156; G1 - Heat Generation Factor (Roller-Raceway):1450; a - Effective Center Location4:0.1 in; G2 - Heat Generation Factor (Rib-Roller End):201; C0 - Static Radial Rating:359000 lbf; |
| M241549/M24151 Timken Tapered Roller Bearings | Lockwasher and Lockplates:W-22; Diameter d :3 13/16 in; Locknut:AN-22; Series:223K and 232K; Taper:1:12; SNW/SNP Assembly Weight:6.04 lb; Bearing Number:22322K, 23222K; B2:4.338 in; Sleeve:S-122 x 3 13/16; S:0.906 in; D1:5.724 in; Tolerance1:-0.004 in; |
| 797/792 Timken Tapered Roller Bearings | Dimension B1:1.72 in; Bolt Hole Spacing J:136.5 mm; Foot Height H1:19.00 mm; Static Load Rating:4460 lbf; Bearing Number:GRA109RRB; Seal Type:Molded Shroud; Dynamic Load Rating:8130 lbf; Dimension L1:59.8 mm; Bearing Type:Ball Bearing; Shaft Size d:1 9/16 in; Bolt Hole Width N:14.3 mm; Total Height H2:100.00 mm; Bolt Hole Length N1:26.2 mm; Dimension T:0.937 in; Base to Center Height H:49.21 mm; Inside Ring Outside Diameter:0.720 in; |
| 78250/78551 Timken Tapered Roller Bearings | Note:This product line wa; Bearing - Housing - Seal UPC:013992079800; Bearing Type:Split Cylindrical Re; Dimension L:5.8 in; Shaft Size:2.75 in; Dimension N:8.5 in; Maximum Speed:3080 rpm; Dimension H:3.1 in; Bearing - Housing - Seal:MSE212BRHHTPS; Dimension R:10.8 in; Cr - Dynamic Load Rating:58001 lbf; Dimension P:0.7 in; Ca - Axial Load Rating:2383 lbf; Seal Type:High Temperature Pac; Series Type:Medium Series; |
| 67790/6772 Timken Tapered Roller Bearings | db - Cone Backface Backing Diameter:19.45 in; R - Cone Backface To Clear Radius3:0.380 in; B - Cone Width:2.8750 in; a - Effective Center Location4:1.05 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:554000 lbf; Aa - Cage-Cone Backface Clearance:0.49 in; Design Units:Imperial; G1 - Heat Generation Factor (Roller-Raceway):4410; G2 - Heat Generation Factor (Rib-Roller End):627; Cage Type:Stamped Steel; |
| 575/572 Timken Tapered Roller Bearings | R - Cone Backface To Clear Radius1:3.560 mm; e - ISO Factor8:0.52; d:179.974 mm; da - Cone Frontface Backing Diameter:203.96 mm; B:63.5 mm; C0 - Static Radial Rating:290000 lbf; a - Effective Center Location3:7.9 mm; Cage Type:Stamped Steel; Da - Cup Frontface Backing Diameter:300.00 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:202000 lbf; r - Cup Backface To Clear Radius2:3.30 mm; Y - ISO Factor9:1.15; |
| JHM840449/JHM84041 Timken Tapered Roller Bearings | Ca90 - Dynamic Thrust Rating (90 million revolutions)6:85900 N; K - Factor7:1.74; G1 - Heat Generation Factor (Roller-Raceway):265.6; Cone Part Number:JHH221437P; db - Cone Backface Backing Diameter:118.11 mm; Cg - Geometry Factor:0.107; C0 - Static Radial Rating:692000 N; Cup Part Number:JHH221414P; Design Units:METRIC; Db - Cup Backface Backing Diameter:170.94 mm; a - Effective Center Location3:-22.9 mm; |
| 3975/392 Timken Tapered Roller Bearings | Seal Type:Shroud Seal; Shaft Size d:1 3/4 in; Inside Ring Width B:=Bearings1_Inside Ri; Series:Medium-Duty; Dynamic Load Rating:8740 lbf; Static Load Rating:5210 lbf; Bearing Number:GYM1112KRRB; Flange Thickness A1:14.3 mm; Total Length L:142.9 mm; Dimension E:2.390 in; Total Height:142.9 mm; Center of Bearing from Bearing End S:19.1 mm; Inside Ring Outside Diameter:2.474 in; Housing Width A:1.689 in; |
HH914449/HH914412 Timken Tapered Roller Bearings Video
TIMKEN HH914449/HH914412 bearings - TIMKEN BEARING
TIMKEN HH914449/HH914412 bearings,TIMKEN BEARING,SKF BEARINGS FAG BEARINGS NSK BEARINGS NORTH INTERNATIONAL TRADE GROUP
Tapered Roller Bearings - Timken CAD
Browse Part Number HH914449 - HH914412, Tapered Roller Bearings - TS (Tapered Single) Imperial in the The Timken Company catalog including Part
Bearing HH914449/HH914412 (Timken) | Size and
Tapered roller bearings HH914449/HH914412 dimensions and specification
Timken Part Number HH914449 - HH914412, Tapered Roller
Timken Part Number HH914449 - HH914412, Tapered Roller Bearings - TS (Tapered Single). Imperial. This is the most basic and most widely used type of
TIMKEN HH914449/HH914412 bearings
TIMKEN HH914449/HH914412 bearings are available in bulk and same day delivery also available in few areas. Rolls Bearing Limited stocks of high tensile,
hh914449/hh914412 - Timken Taper Roller - Quality Bearings
Product: hh914449/hh914412 | Brand: Timken | Size: 2.625x7x2.25inches | In Stock | Same Day Despatch | All Orders Shipped via DHL | Quality Bearings