| No. | Brand | D | r | b | s | J | w | G | L |
| SFCN-IP-203RE | DODGE | - | - | - | - | - | - | - | 628.65 mm |
| P2B-SCB-107 | DODGE | - | - | - | - | - | - | - | - |
| F2B-SCEZ-100-PCR | DODGE | - | - | - | - | - | - | - | - |
| FC-SXR-200 | DODGE | - | - | - | - | - | - | - | - |
| F4B-SC-010L-HT | DODGE | - | - | - | - | - | - | - | - |
| P2B-SL-008 | DODGE | 78 mm | - | - | - | - | - | - | - |
| F4B-SC-60M | DODGE | 279.4 mm | - | - | - | - | - | - | - |
| F4R-IP-215R | DODGE | - | - | - | - | - | - | - | - |
| F2B-SCEZ-012-P | DODGE | - | - | - | - | - | - | M 80x2 | - |
| P4B534-ISAF-515R HYD | DODGE | - | - | - | - | - | - | - | - |
| F4B-VSC-107-NL | DODGE | - | - | - | - | - | - | - | - |
| P2B-GTMUAH-111 | DODGE | - | - | - | - | - | - | - | - |
| FC-IP-206RE | DODGE | 650 mm | - | - | - | - | - | - | - |
| INS-DL-100 | DODGE | - | 2 | - | - | - | - | - | - |
| LF-SC-100-NL | DODGE | - | - | - | - | - | - | - | - |
| F2B-GTAH-09 | DODGE | - | - | - | - | - | - | - | 419.1 mm |
| H4S-617-USAF | DODGE | - | - | 13 mm | 2 mm | - | - | - | - |
| P2B-K-103R MOD | DODGE | - | - | - | - | - | - | - | - |
| P2B-SC-012-HT | DODGE | - | - | - | - | - | - | - | 387.35 mm |
| P2B-GTM-211 | DODGE | - | - | - | - | - | - | - | - |
| P2B-DLEZ-30M-SHCR | DODGE | - | 4 | - | - | - | - | - | - |
| 5066 | DODGE | - | - | - | - | - | - | - | - |
| 0.75 Inch | 19.05 Millimeter x 1.156 Inch | 29.362 Millimeter x 1.313 Inch | 33.35 Millimeter DODGE P2B-SC-012-HT Pillow Block Bearings | H:222.25 mm; Cap bolt recommended tightening torque:515.2 N·m; da:76.2 mm; Initial grease fill:181.44 g; Cap bolt:2 x 3/4-10 UNC; Max. speed for Taconite seal:1050 r/min; S:4.763 mm; Housing:FSAF 617; Da:180 mm; L:387.35 mm; Size (mm):0.75 Inch | 19.05 Millimeter x 1.156 Inch | 29.362 Millimeter x 1.313 Inch | 33.35 Millimeter ; |
| DODGE F4B-GT-111 Flange Block Bearings | Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.08; Specific dynamic load factor K:140 N/mm²; Mass bushing:0.62 kg; D:125 mm; Specific static load factor K0:200 N/mm²; Permissible sliding velocity v max.:0.5 m/s; Coefficient of friction µ min.:0.03; Tolerance shaft:h8; Tolerance housing:H7; |
| DODGE F4B-SCEZ-106-SH Mounted Units & Inserts | r1,2 min.:7.5 mm; K:12 mm; r3,4 min.:7.5 mm; d:529.91 mm; Mass bearing:1660 kg; Basic dynamic load rating C:16800 kN; b:22.3 mm; D1 ≈:751 mm; F:615 mm; Fatigue load limit Pu:2450 kN; |
| DODGE F2B-GTAH-09 Mounted Units & Inserts | Stabilizing ring:SR-22-19; R1:67.866 mm; Eye bolt:2 x 3/8-16 UNC; Cap bolt:5/8-11 UNC; Bearing:22222 EK; Initial grease fill:232.47 g; H2:52.388 mm; Labyrinth ring:2 x LOR 557; L:419.1 mm; Mass pillow block:54 kg; |
| DODGE FB-SCM-111 MOD Flange Block Bearings | Reference speed:7000 r/min; Ba min.:9 mm; D1 ≈:79 mm; K:3 mm; Da max.:83 mm; d2 ≈:60 mm; d1:45 mm; D:90 mm; r1,2 min.:1.1 mm; Calculation factor Y2:4.2; |
| DODGE F4B-GTEZ-30M-PCR Flange Block Bearings | rb:1; ra:1; KBRG:4152; LangID:1; SDM_:44; GRS rpm:10000; DE_:54; C_conv:41500; C0:37.5; TSR rpm:11000; |
| 1 Inch | 25.4 Millimeter x 1.438 Inch | 36.525 Millimeter x 1.438 Inch | 36.525 Millimeter DODGE P2B-DL-100-NL Pillow Block Bearings | D_:1000; ra:5; Prod_Type3:DGBB_SR_OT; SRI:39.43; ALPHA_:0; LangID:1; SRE:39.43; Z_:19; DA_:76.2; C_conv:785000; Size (mm):1 Inch | 25.4 Millimeter x 1.438 Inch | 36.525 Millimeter x 1.438 Inch | 36.525 Millimeter ; |
| DODGE INS-DL-111-CR Insert Bearings Spherical OD | yobi:NUP2315EM; Prod_Type3:CRB_SR_NUP; Macha rpm:6700; ALPHA_:0; hidYobi:NUP2315EM; TSR rpm:4800; r1:2.1; rb:2; r:2.1; DA_:24; |
| DODGE INS-IP-300L Insert Bearings Spherical OD | Cap bolt, SAE grade:8; R2:30.163 mm; J max.:333.375 mm; Labyrinth ring:2 x LOR 184; P120°:35.6 kN; Appropriate attachment bolt size G:0.875 in; Max. speed for PosiTrac Plus seal:1950 r/min; R1:65.088 mm; Stabilizing ring:2 x SR-1617; Mass pillow block:31.4 kg; |
| 0.875 Inch | 22.225 Millimeter x 1.188 Inch | 30.17 Millimeter x 1.313 Inch | 33.35 Millimeter DODGE P2B-SCB-014 Pillow Block Bearings | Pu:57.220 kN; s:2.5 mm; E:mm; r1s (min):4 mm; B:60 mm; b:16 mm; d2 (max):162 mm; Static (Coa):562 kN; rs (min):4 mm; b1:27 mm; Size (mm):0.875 Inch | 22.225 Millimeter x 1.188 Inch | 30.17 Millimeter x 1.313 Inch | 33.35 Millimeter ; |
| 2.188 Inch | 55.575 Millimeter x 3.031 Inch | 77 Millimeter x 3 Inch | 76.2 Millimeter DODGE P2B513-ISAF-203L Pillow Block Bearings | SRE:3.51; ra:0.6; m0:0.273; ALPHA_:15; KBRG:7114; 2B_:24; Z_:21; LangID:1; DI_:54.242; r1:0.3; Size (mm):2.188 Inch | 55.575 Millimeter x 3.031 Inch | 77 Millimeter x 3 Inch | 76.2 Millimeter ; |
| 1.378 Inch | 35 Millimeter x 1.752 Inch | 44.5 Millimeter x 1.874 Inch | 47.6 Millimeter DODGE P2B-DL-35M Pillow Block Bearings | Static (Cor):8.3 mm; B:64 mm; d:130 mm; Dynamic (Cr):4.5 mm; rs (min):2 mm; Oil:94.960 kN; with cylindrical bore:1 700 min-1; with tapered bore:2 200 min-1; D:210 mm; Grease:913 kN; Size (mm):1.378 Inch | 35 Millimeter x 1.752 Inch | 44.5 Millimeter x 1.874 Inch | 47.6 Millimeter ; |
| DODGE WSTU-E-203R Take Up Unit Bearings | B5:66 mm; G:Tr 400x5; A:6.5 mm; B:52 mm; Mass adapter sleeve assembly:40 kg; B1:210 mm; G3:9 mm; d1:380 mm; Locking device:MS 3080-76; G2:M 6; |
| DODGE H4S-338-USAF Mounted Units & Inserts | static Cor:15.400 kN; D1:13 mm; Oil:10 000 min-1; Pu:0.700 kN; d1:26 mm; d:12 mm; rs (min):0.3 mm; Grease:7 500 min-1; H:9 mm; dynamic Cr:11.540 kN; |
DODGE F4R-IP-212RE Flange Block Bearings Video