| No. | Brand | D | r | b | s | J | w | G | L |
| 5066 | DODGE | - | - | - | - | - | - | - | - |
| SP2B-IP-304R | DODGE | 190 mm | - | - | - | - | - | - | - |
| F4B-VSC-111 | DODGE | 46 mm | - | - | - | - | - | - | - |
| FC-IP-104L | DODGE | 736.6 mm | - | - | - | - | - | - | - |
| FC-S2-215L | DODGE | 160 mm | - | - | - | - | - | - | - |
| FC-SC-207-FF | DODGE | - | - | - | - | - | - | - | - |
| F4B-SL-112 MOD | DODGE | - | - | - | - | - | - | - | - |
| F4B-GT-111 | DODGE | 125 mm | - | - | - | - | - | - | - |
| F4B-SD-515 | DODGE | - | 2 | - | - | - | - | - | - |
| DU-DI-114R | DODGE | - | 2 | - | - | - | - | - | - |
| P2B-SC-012-HT | DODGE | - | - | - | - | - | - | - | 387.35 mm |
| F4B-SCEZ-106-SH | DODGE | - | - | 22.3 mm | - | - | - | - | - |
| P2B-K-103R MOD | DODGE | - | - | - | - | - | - | - | - |
| INS-DL-100 | DODGE | - | 2 | - | - | - | - | - | - |
| P2B-GTMUAH-111 | DODGE | - | - | - | - | - | - | - | - |
| F4B-GTEZ-30M-PCR | DODGE | - | - | - | - | - | - | - | - |
| CP4B056-USAF-915TT | DODGE | - | - | - | - | - | - | - | - |
| FB-SCM-111 MOD | DODGE | 90 mm | - | - | - | - | - | - | - |
| EFC-IP-407L | DODGE | - | - | - | - | - | - | - | - |
| P2B-UN2-307 | DODGE | - | - | - | - | - | - | - | - |
| 1.378 Inch | 35 Millimeter x 1.752 Inch | 44.5 Millimeter x 1.874 Inch | 47.6 Millimeter DODGE P2B-DL-35M Pillow Block Bearings | Static (Cor):8.3 mm; B:64 mm; d:130 mm; Dynamic (Cr):4.5 mm; rs (min):2 mm; Oil:94.960 kN; with cylindrical bore:1 700 min-1; with tapered bore:2 200 min-1; D:210 mm; Grease:913 kN; Size (mm):1.378 Inch | 35 Millimeter x 1.752 Inch | 44.5 Millimeter x 1.874 Inch | 47.6 Millimeter ; |
| DODGE H4S-617-USAF Mounted Units & Inserts | r1s (min):3 mm; b1:22.5 mm; B:47 mm; b:13 mm; E:185.5 mm; s:2 mm; F:130 mm; Dynamic (Ca):299 kN; rs (min):3 mm; d2 (max):142.4 mm; |
| DODGE NSTU-LT10-012 Mounted Units & Inserts | G2:G 1/4; d1:600 mm; d:630 mm; Mass withdrawal sleeve:139 kg; Hydraulic nut:HMV 134 E; G1:40 mm; A:9 mm; B2:466 mm; Nut for removal:HM 31/670; G:Tr 670x6; |
| 2.75 Inch | 69.85 Millimeter x 3.5 Inch | 88.9 Millimeter x 3.25 Inch | 82.55 Millimeter DODGE P4B-IP-212RE Pillow Block Bearings | ra max.:2 mm; da max.:76.7 mm; Basic static load rating C0:1270 kN; α:8 °; Design (sliding contact surface combination):Steel/steel; Da max.:105.7 mm; Basic dynamic load rating C:425 kN; B:64.643 mm; d:63.5 mm; Material constant KM:330; Size (mm):2.75 Inch | 69.85 Millimeter x 3.5 Inch | 88.9 Millimeter x 3.25 Inch | 82.55 Millimeter ; |
| DODGE WSTU-SCM-204 Take Up Unit Bearings | ALP22:0; mass:141; LangID:1; KBRG:3661; e:0.47; D_:482.6; BET23:0; Y3:1; C_:269.875; Prod_Type3:TRBSR_FR_KVS_A; |
| DODGE P2B-SCH-115-E-HT Mounted Units & Inserts | Limiting speed:9000 r/min; Da max.:83 mm; r3,4 min.:1.1 mm; d:50 mm; r1,2 min.:1.1 mm; Fatigue load limit Pu:7.5 kN; F:59.5 mm; rb max.:1 mm; da max.:57 mm; B:20 mm; |
| DODGE WSTU-E-203R Take Up Unit Bearings | B5:66 mm; G:Tr 400x5; A:6.5 mm; B:52 mm; Mass adapter sleeve assembly:40 kg; B1:210 mm; G3:9 mm; d1:380 mm; Locking device:MS 3080-76; G2:M 6; |
| 3.438 Inch | 87.325 Millimeter x 4.016 Inch | 102 Millimeter x 3.75 Inch | 95.25 Millimeter DODGE P4B-S2-307LE Pillow Block Bearings | Housing:SYWK 504 Y; A:32 mm; Basic static load rating C0:6.55 kN; J max.:101 mm; A5:26.3 mm; Mass bearing unit:0.27 kg; N:17.5 mm; H2:16 mm; End cover:ECW 204; A1:21 mm; Size (mm):3.438 Inch | 87.325 Millimeter x 4.016 Inch | 102 Millimeter x 3.75 Inch | 95.25 Millimeter ; |
| DODGE FC-IP-110LE Flange Block Bearings | d:85 mm; D:110 mm; static Cor:150.000 kN; rs (min):1 mm; Pu:6.820 kN; Oil:3 500 min-1; dynamic Cr:51.520 kN; Grease:2 700 min-1; D1:87 mm; H:19 mm; |
| DODGE FC-IP-115LE Flange Block Bearings | Thrust factor K:1.54; d1 ≈:516 mm; Design variant/feature:TQOS/GWISI; Calculation factor e:0.37; T:320.675 mm; Comparative radial load rating CF:1270 kN; d:489.026 mm; Calculation factor Y0:1.8; Calculation factor Y1:1.8; D1 ≈:588 mm; |
| 1.375 Inch | 34.925 Millimeter x 3 Inch | 76.2 Millimeter x 1.875 Inch | 47.63 Millimeter DODGE P2B-EXL-106RE Pillow Block Bearings | N1:35 mm; Q180°:900 kN; J1:130 mm; Appropriate attachment bolt, rec. tightening torque:1310 N·m; P0°:2600 kN; Adapter sleeve:H 2338; N4 max.:20 mm; End cover:ETS 40; L:610 mm; H:411 mm; Size (mm):1.375 Inch | 34.925 Millimeter x 3 Inch | 76.2 Millimeter x 1.875 Inch | 47.63 Millimeter ; |
| DODGE F2B-GTAH-09 Mounted Units & Inserts | Stabilizing ring:SR-22-19; R1:67.866 mm; Eye bolt:2 x 3/8-16 UNC; Cap bolt:5/8-11 UNC; Bearing:22222 EK; Initial grease fill:232.47 g; H2:52.388 mm; Labyrinth ring:2 x LOR 557; L:419.1 mm; Mass pillow block:54 kg; |
| 3.25 Inch | 82.55 Millimeter x 4.172 Inch | 105.969 Millimeter x 3.75 Inch | 95.25 Millimeter DODGE SP2B-IP-304R Pillow Block Bearings | Coefficient of friction µ min.:0.08; α:124 °; Tolerance shaft:e7; a:8 mm; Coefficient of friction µ max.:0.15; d:170 mm; Specific static load factor K0:45 N/mm²; B:160 mm; Permissible sliding velocity v max.:0.5 m/s; D:190 mm; Size (mm):3.25 Inch | 82.55 Millimeter x 4.172 Inch | 105.969 Millimeter x 3.75 Inch | 95.25 Millimeter ; |
| DODGE F4B-GT-07-NL Mounted Units & Inserts | B:25.4 mm; Hexagonal key size for grub screw N:4.763 mm; Recommended tightening torque for grub screw:16.5 N·m; s1:29.4 mm; D:72 mm; d1 ≈:46.1 mm; Limiting speed1):5300 r/min; Fatigue load limit Pu:0.655 kN; d2:51.1 mm; Basic dynamic load rating C:25.5 kN; |
DODGE WSTU-SC-215-HT Take Up Unit Bearings Video
059844 - - Dodge Wstu-sc-215-ht - Neobits Inc
Neobits.com: Buy Dodge - 059844 - - Dodge Wstu-sc-215-ht.
dodge 059844 wstu-sc-215-ht wide slot takeup standard ...
Typically ships in: 1 day ; Weight: 16.8 lb ; Unit of measure: each ; Bearing Duty, Normal Duty ; Bearing Family, Setscrew Ball Bearing.
DODGE 059844 WSTU-SC-215-HT - Walker Industrial
059844 - DODGE 059844 WSTU-SC-215-HT.
WSTU-SC-215-HT - DODGE | Take Up Unit Bearings | BDI ...
DODGE DODGE. WSTU-SC-215-HT · Take Up Bearing Only; 2-15/16" Bore; 1-1/16" Slot Width; 5-15/16" Slot to Slot Distance; Ball Bearing; Unit Only; Set Screw Mount; ...
Dodge WSTU-SC-215 - Motion
Buy Dodge WSTU-SC-215 Take-Up Ball Bearing Unit - Side Mount, 2.9375 in Bore, Cast Iron Housing, Set Screw Collar, 27 mm Slot at Motion Industries.
Dodge® WSTU-SC-215 | Purvis Industries
WSTU-SC-215. Dodge® 125119 215 Non-Expansion Normal Duty Single Lip Wide Slot Take-Up Set Screw Ball Bearing, 2-15/16 in Dia Bore, 9.13 in L x 6.69 in W x ...
Dodge | WSTUSC215HT | Ball Bearing Take-Up Unit | Applied
Dodge WSTUSC215HT. Ball Bearing Take-Up Unit. Item #101846470. each. Shipment Options. One Time Shipment. Auto-Replenish. Frequency.
059844 - Dodge - WSTU-SC-215-HT | MRO-PT
059844 - Dodge - WSTU-SC-215-HT ; SKU: 059844 ; UPC: 782475556144 ; Availability: Typically Ships in 1-3 Days ; Weight: 16.75 LBS ; Bearing Material: Steel.