| No. | Brand | D | r | b | s | J | w | G | L |
| P2B-UN2-307 | DODGE | - | - | - | - | - | - | - | - |
| P2B-EXL-114RE | DODGE | - | - | - | - | - | - | - | - |
| P2B-SCUAH-30M | DODGE | - | 2.1 | - | - | - | - | - | - |
| P4B-IP-212RE | DODGE | - | - | - | - | - | - | - | - |
| NSTU-LT10-012 | DODGE | - | - | - | - | - | - | Tr 670x6 | - |
| NSTU-SC-101 | DODGE | - | 2 | - | - | - | - | - | - |
| F4B-VSC-111 | DODGE | 46 mm | - | - | - | - | - | - | - |
| P4B-IP-211RE | DODGE | - | - | - | - | - | - | - | - |
| F2B-GTAH-09 | DODGE | - | - | - | - | - | - | - | 419.1 mm |
| WSTU-SCM-204 | DODGE | - | - | - | - | - | - | - | - |
| FC-SXR-200 | DODGE | - | - | - | - | - | - | - | - |
| P2B-SCB-107 | DODGE | - | - | - | - | - | - | - | - |
| F4B-GT-111 | DODGE | 125 mm | - | - | - | - | - | - | - |
| P4B-S2-307LE | DODGE | - | - | - | - | - | - | - | - |
| 5066 | DODGE | - | - | - | - | - | - | - | - |
| FC-S2-215L | DODGE | 160 mm | - | - | - | - | - | - | - |
| WSTU-SC-215-HT | DODGE | - | 2 | - | - | - | - | - | - |
| FC-IP-115LE | DODGE | - | - | - | - | - | - | - | - |
| P4B-SD-214E | DODGE | - | - | - | - | - | - | - | - |
| P2B-LTB7-108 | DODGE | 920 mm | - | - | - | - | - | - | - |
| LF-SC-100-NL | DODGE | - | - | - | - | - | - | - | - |
| INS-IP-300L | DODGE | - | - | - | - | - | - | - | - |
| P4B517-TAF-300RE | DODGE | - | - | - | - | - | - | - | - |
| F4B-SC-010L-HT | DODGE | - | - | - | - | - | - | - | - |
| 2.438 Inch | 61.925 Millimeter x 2.109 Inch | 53.569 Millimeter x 2.688 Inch | 68.275 Millimeter DODGE P2B-GTB-207 Pillow Block Bearings | Permissible sliding velocity v min.:0 m/s; a:7 mm; Coefficient of friction µ min.:0.08; Permissible sliding velocity v max.:0.5 m/s; D:260 mm; Tolerance housing:H7; Mass bushing:9.71 kg; Specific static load factor K0:45 N/mm²; Tolerance shaft:e7; D1:275 mm; Size (mm):2.438 Inch | 61.925 Millimeter x 2.109 Inch | 53.569 Millimeter x 2.688 Inch | 68.275 Millimeter ; |
| DODGE NSTU-DL-100 MOD Take Up Unit Bearings | Specific static load factor K0:45 N/mm²; D:45 mm; a:3 mm; Tolerance housing:H7; h:36 mm; α:124 °; d:35 mm; Permissible sliding velocity v max.:0.5 m/s; Specific dynamic load factor K:25 N/mm²; Coefficient of friction µ max.:0.15; |
| DODGE F4R-IP-215R Flange Block Bearings | d1:180 mm; Calculation factor Y1:2.6; G1:18 mm; K:9 mm; Reference speed:1700 r/min; Fatigue load limit Pu:150 kN; B2 ≈:117 mm; da min.:199 mm; Da max.:323 mm; Calculation factor e:0.26; |
| DODGE FC-S2-215L Flange Block Bearings | Permissible sliding velocity v min.:0 m/s; B:90 mm; α:124 °; Specific static load factor K0:45 N/mm²; D:160 mm; Specific dynamic load factor K:25 N/mm²; d:140 mm; Coefficient of friction µ min.:0.08; Tolerance shaft:e7; a:4.5 mm; |
| DODGE F4B-E-315R Flange Block Bearings | L:466.725 mm; R1:79.375 mm; P150°:118 kN; PG:1/4 NPT; Cap bolt:3/4-10 UNC; R2:36.513 mm; da:111.125 mm; Bearing:22226 EK; h:60.325 mm; Pa:24.9 kN; |
| 3 Inch | 76.2 Millimeter x 4.5 Inch | 114.3 Millimeter x 3.75 Inch | 95.25 Millimeter DODGE P4B517-TAF-300RE Pillow Block Bearings | Oil rpm:1400; DE_:418; D_a max:444; d:300; LangID:1; GRS rpm:1200; yobi:NN3060K; ra max:3; d1a min:319; B_:118; Size (mm):3 Inch | 76.2 Millimeter x 4.5 Inch | 114.3 Millimeter x 3.75 Inch | 95.25 Millimeter ; |
| DODGE WSTU-SC-50M Take Up Unit Bearings | P150°:80.1 kN; Stabilizing ring:SR-30-0; J max.:463.55 mm; ba:77.787 mm; PG:1/4 NPT; Bearing limiting speed:2200 r/min; R1:95.25 mm; Adapter sleeve assembly:SNW 130x5.3/8; Labyrinth ring:2 x LOR 128; Eye bolt:2 x 3/8-16 UNC; |
| DODGE INS-IP-600L Insert Bearings Spherical OD | D1:10.719; SREX:0.02; SDM_:6.35; SREN:0; Z_:7; C:0.64; Prod_Type3:ESM_ID_WF_ZZ; DI_:4.762; d:3.175; hidYobi:FR2-6ZZS; |
| 2.688 Inch | 68.275 Millimeter x 2.453 Inch | 62.3 Millimeter x 3.5 Inch | 88.9 Millimeter DODGE P2B-GTM-211 Pillow Block Bearings | Reference speed:3400 r/min; Calculation factor kr:0.2; ra max.:2 mm; Fatigue load limit Pu:72 kN; C:58 mm; D1 ≈:187.75 mm; Fw:143.5 mm; da max.:153 mm; Basic static load rating C0:630 kN; r1,2 min.:2.1 mm; Size (mm):2.688 Inch | 68.275 Millimeter x 2.453 Inch | 62.3 Millimeter x 3.5 Inch | 88.9 Millimeter ; |
| DODGE INS-UN2-308R Insert Bearings Spherical OD | ra max.:3 mm; d1 ≈:96 mm; Basic dynamic load rating C:177 kN; Cb min.:11.5 mm; r3,4 min.:2.5 mm; T:33.5 mm; a:39.336 mm; Mass bearing:1.93 kg; Calculation factor Y0:0.4; rb max.:2.5 mm; |
| DODGE H4S-617-USAF Mounted Units & Inserts | r1s (min):3 mm; b1:22.5 mm; B:47 mm; b:13 mm; E:185.5 mm; s:2 mm; F:130 mm; Dynamic (Ca):299 kN; rs (min):3 mm; d2 (max):142.4 mm; |
| 3.5 Inch | 88.9 Millimeter x 2.859 Inch | 72.619 Millimeter x 3.75 Inch | 95.25 Millimeter DODGE P2B-UN2-308E Pillow Block Bearings | B2:24.5 mm; r3,4 min.:3 mm; B1:12 mm; d1 ≈:194.8 mm; d:150 mm; Mass angle ring:1.35 kg; Size (mm):3.5 Inch | 88.9 Millimeter x 2.859 Inch | 72.619 Millimeter x 3.75 Inch | 95.25 Millimeter ; |
| 0.75 Inch | 19.05 Millimeter x 1.156 Inch | 29.362 Millimeter x 1.313 Inch | 33.35 Millimeter DODGE P2B-SC-012-HT Pillow Block Bearings | H:222.25 mm; Cap bolt recommended tightening torque:515.2 N·m; da:76.2 mm; Initial grease fill:181.44 g; Cap bolt:2 x 3/4-10 UNC; Max. speed for Taconite seal:1050 r/min; S:4.763 mm; Housing:FSAF 617; Da:180 mm; L:387.35 mm; Size (mm):0.75 Inch | 19.05 Millimeter x 1.156 Inch | 29.362 Millimeter x 1.313 Inch | 33.35 Millimeter ; |
| DODGE FC-IP-104L Flange Block Bearings | r3,4 min.:6.4 mm; Basic dynamic load rating C:6050 kN; r1,2 min.:3.3 mm; T:258.762 mm; Comparative radial load rating CF:1500 kN; B:258.762 mm; Mass bearing:370 kg; Calculation factor e:0.33; Calculation factor Y2:3; D:736.6 mm; |
DODGE NSTU-SC-101 Take Up Unit Bearings Video
Dodge NSTU-SC-101 - ISC Companies
Dodge NSTU-SC-101 Narrow Slot Take-Up, Set Screw Ball Bearing, Mfg Part Number 125366, Shaft Size 1-1/16 in. (1.0625"), SC Normal Duty, 206 Series.
dodge nstu-sc-101 - Lily Bearing Online
Looking for DODGE NSTU-SC-101 BEARING? Price $104.08 + Free Shipping! Easy online ordering with 24/7 expert product support.Other Features: Single Row | Spherical | Normal ...Housing Style: Unit OnlySlot Width: 0.25 Inch | 6.35 MillimeterHousing Material: Cast Iron
125366 - Dodge - NSTU-SC-101 | MRO-PT
125366 - Dodge - NSTU-SC-101 ; Weight: 2.90 LBS ; Bearing Material: Steel ; Bore Diameter: 1-1/16 in ; Finish: Powder Coated ; Height: 4.13 in.Bearing Material: SteelLoad Capacity: 4368 lb Dynamic/2538 lb StaticType: Narrow Slot Non-Expansion Normal Duty ...Suitable For Use With: NS308 Take-Up Frames
Dodge NSTU-SC-100 - Motion
Buy Dodge NSTU-SC-100 Take-Up Ball Bearing Unit - Side Mount, 1.0000 in Bore, Cast Iron Housing, Set Screw Collar, 6.35 mm Slot at Motion Industries.Bearing Type: BallDynamic Load Capacity: 3146 lbfHousing Material: Cast IronStatic Load Capacity: 1769 lbfMissing: 101 | Must include: 101
DODGE NSTU-SC-101 Take Up Unit Bearings NSTU-SC-101
Category. Take Up Unit Bearings. Inventory. 0.0. Manufacturer Name. ABB MOTORS AND. MECHANICAL INC. Minimum Buy Quantity. N/A. Weight. 1.317. Product Group.
NSTUSC101,DODGE NSTUSC101; Mounted Bearing Unit
Descripition. Brand:DODGE. Part Number(s):NSTUSC101. ProductName:Mounted Bearing Unit. Inside Diameter : 26.99 mm,1.0625 in. Shaft Height : 88.9 mm,3.5 in.
125366 nstu-sc-101 - dodge - 3BG Supply Co.
Buy DODGE 125366 NSTU-SC-101 Take Up Unit from 3BG Supply. Buy DODGE Take Up Unit online from 3BG Supply - We simplify & supply industrial MRO and ...
125366 - - Dodge Nstu-sc-101 - Neobits, Inc.
Dodge - 125366 - - Dodge Nstu-sc-101. Item #: 11851779. MFR SKU: 125366. $105.95. +. -. Add to cart. Alert me if price drops. Full Name: Email Address:.