| No. | Brand | D | r | b | s | J | w | G | L |
| P2B-GTMUAH-111 | DODGE | - | - | - | - | - | - | - | - |
| EP4B-S2-300L | DODGE | - | - | - | - | - | - | - | - |
| P2B-SC-012-HT | DODGE | - | - | - | - | - | - | - | 387.35 mm |
| P2B-EXL-114RE | DODGE | - | - | - | - | - | - | - | - |
| FC-IP-115LE | DODGE | - | - | - | - | - | - | - | - |
| INS-S2-106R | DODGE | - | - | - | - | - | - | M 50x1.5 | - |
| WSTU-SXR-012 | DODGE | - | - | - | - | - | - | - | - |
| F4B-SD-400 | DODGE | - | 2.1 | - | - | - | - | - | - |
| P2B-SXVU-102 | DODGE | - | - | - | - | - | - | - | - |
| F4B-GT-07-NL | DODGE | 72 mm | - | - | - | - | - | - | - |
| F4B-SD-515 | DODGE | - | 2 | - | - | - | - | - | - |
| EFC-IP-407L | DODGE | - | - | - | - | - | - | - | - |
| F4B-SL-112 MOD | DODGE | - | - | - | - | - | - | - | - |
| P2B-SCAH-102 | DODGE | - | - | - | - | - | - | - | - |
| P2B-GTM-211 | DODGE | - | - | - | - | - | - | - | - |
| FC-S2-215L | DODGE | 160 mm | - | - | - | - | - | - | - |
| F2B-GTAH-09 | DODGE | - | - | - | - | - | - | - | 419.1 mm |
| F2B-SCEZ-100-PCR | DODGE | - | - | - | - | - | - | - | - |
| DU-DI-114R | DODGE | - | 2 | - | - | - | - | - | - |
| INS-IP-300L | DODGE | - | - | - | - | - | - | - | - |
| FC-IP-108R | DODGE | - | - | - | - | - | - | - | - |
| P2B-GTB-25M | DODGE | - | - | - | - | - | - | - | - |
| P2B-SCH-115-E-HT | DODGE | - | - | - | - | - | - | - | - |
| 0.938 Inch | 23.825 Millimeter x 1.438 Inch | 36.525 Millimeter x 1.313 Inch | 33.35 Millimeter DODGE P2B-DLB-015 Pillow Block Bearings | ba:65.881 mm; A2:193.675 mm; Labyrinth ring:2 x LOR 117; Adapter sleeve assembly:SNW 126x4.7/16; Bearing:23226 CCK/W33; Mass pillow block:68 kg; Ca:89.789 mm; Bearing limiting speed:2600 r/min; H2:60.325 mm; R1:79.375 mm; Size (mm):0.938 Inch | 23.825 Millimeter x 1.438 Inch | 36.525 Millimeter x 1.313 Inch | 33.35 Millimeter ; |
| 2.188 Inch | 55.575 Millimeter x 3.031 Inch | 77 Millimeter x 3 Inch | 76.2 Millimeter DODGE P2B513-ISAF-203L Pillow Block Bearings | SRE:3.51; ra:0.6; m0:0.273; ALPHA_:15; KBRG:7114; 2B_:24; Z_:21; LangID:1; DI_:54.242; r1:0.3; Size (mm):2.188 Inch | 55.575 Millimeter x 3.031 Inch | 77 Millimeter x 3 Inch | 76.2 Millimeter ; |
| DODGE F4B-GT-107 Flange Block Bearings | Housing:FYWR 508 Y; J:101.6 mm; s1:30.2 mm; B:49.2 mm; Recommended tightening torque for grub screw:6.5 N·m; A5:31.5 mm; Recommended diameter for attachment bolts, inch G:0.5 in; RG:1/4-28 UNF; L:130.2 mm; N:14.3 mm; |
| DODGE F4B-VSC-111-NL Flange Block Bearings | D:300 mm; Mass bearing:20 kg; Fatigue load limit Pu:88 kN; r1,2 min.:4 mm; Reference speed:2400 r/min; Basic dynamic load rating C:780 kN; d1 ≈:195 mm; Basic static load rating C0:830 kN; db min.:199 mm; Limiting speed:2800 r/min; |
| DODGE FC-IP-108R Flange Block Bearings | SDM_:181.5; C_conv:530000; Fw:153.5; db min:143; ra:2.5; dd min:168; KBRG:4165; db max:150; C0:735; rb:2.5; |
| 3.188 Inch | 80.975 Millimeter x 7 Inch | 177.8 Millimeter x 5.5 Inch | 139.7 Millimeter DODGE P2B-C-303E Pillow Block Bearings | d2 max.:182 mm; w:90 mm; B:55 mm; Mass rod end:15 kg; α:6 °; Basic dynamic load rating C:400 kN; r1 min.:1 mm; Basic static load rating C0:655 kN; l7 min.:88 mm; d4 ≈:105 mm; Size (mm):3.188 Inch | 80.975 Millimeter x 7 Inch | 177.8 Millimeter x 5.5 Inch | 139.7 Millimeter ; |
| DODGE NSTU-SC-101 Take Up Unit Bearings | SDM_:227.5; da min:199; GRS rpm:2000; D_a max:251; Prod_Type3:CRB_SR_NNU_CB; hidYobi:NNU4938; d1a min:203; d:190; Z_:36; r:2; |
| DODGE FB-SCM-111 MOD Flange Block Bearings | Reference speed:7000 r/min; Ba min.:9 mm; D1 ≈:79 mm; K:3 mm; Da max.:83 mm; d2 ≈:60 mm; d1:45 mm; D:90 mm; r1,2 min.:1.1 mm; Calculation factor Y2:4.2; |
| DODGE NSTU-LT10-012 Mounted Units & Inserts | G2:G 1/4; d1:600 mm; d:630 mm; Mass withdrawal sleeve:139 kg; Hydraulic nut:HMV 134 E; G1:40 mm; A:9 mm; B2:466 mm; Nut for removal:HM 31/670; G:Tr 670x6; |
| 5.938 Inch | 150.825 Millimeter x 9 Inch | 228.6 Millimeter x 7.063 Inch | 179.4 Millimeter DODGE P4B534-TAF-515RE Pillow Block Bearings | Tolerance shaft:h8; Coefficient of friction µ max.:0.1; Mass bushing:0.004 kg; D1:14 mm; B:10 mm; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v min.:0.25 m/s; B1:2 mm; d:6 mm; Permissible sliding velocity v max.:5 m/s; Size (mm):5.938 Inch | 150.825 Millimeter x 9 Inch | 228.6 Millimeter x 7.063 Inch | 179.4 Millimeter ; |
| DODGE F4R-IP-212RE Flange Block Bearings | N1:48 mm; Bearing (basic designation):23272 K; Q120°:4200 kN; Mass housing:595 kg; Appropriate attachment bolt, rec. tightening torque:3640 N·m; Locating ring:2 x FRB 10/650; Labyrinth seal:2 x TS 80/340; N:60 mm; Da:650 mm; Cap bolt, rec. tightening torque:600 N·m; |
| DODGE FC-S2-215L Flange Block Bearings | Permissible sliding velocity v min.:0 m/s; B:90 mm; α:124 °; Specific static load factor K0:45 N/mm²; D:160 mm; Specific dynamic load factor K:25 N/mm²; d:140 mm; Coefficient of friction µ min.:0.08; Tolerance shaft:e7; a:4.5 mm; |
| DODGE F2B-SCEZ-012-P Flange Block Bearings | Lock nut:KMFE 16; G:M 80x2; Hydraulic nut:HMV 16 E; d:80 mm; B:18 mm; d1:70 mm; Mass adapter sleeve assembly:1 kg; d3:105 mm; B1:59 mm; |
| 0.984 Inch | 25 Millimeter x 1.453 Inch | 36.9 Millimeter x 1.311 Inch | 33.3 Millimeter DODGE P2B-GTB-25M Pillow Block Bearings | Ew:10 mm; Basic static load rating C0:3.15 kN; Limiting speed:38000 r/min; Reference speed:34000 r/min; U:13 mm; Designation associated G design radial shaft seal with a low cross-sectional height:G 6x10x2 S; Basic dynamic load rating C:3.69 kN; Fatigue load limit Pu:0.36 kN; Mass needle roller and cage assembly:0.0019 kg; Fw:6 mm; Size (mm):0.984 Inch | 25 Millimeter x 1.453 Inch | 36.9 Millimeter x 1.311 Inch | 33.3 Millimeter ; |
1.375 Inch | 34.925 Millimeter x 3 Inch | 76.2 Millimeter x 2.375 Inch | 60.325 Millimeter DODGE P2B-DI-106RE Pillow Block Bearings Video