| No. | Brand | D | r | b | s | J | w | G | L |
| WSTU-IP-208R | DODGE | - | - | - | - | - | - | - | - |
| P2B-SC-012-HT | DODGE | - | - | - | - | - | - | - | 387.35 mm |
| EP4B-S2-300L | DODGE | - | - | - | - | - | - | - | - |
| INS-UN2-308R | DODGE | - | - | - | - | - | - | - | - |
| F4B-GT-111 | DODGE | 125 mm | - | - | - | - | - | - | - |
| P2B-SCAH-102 | DODGE | - | - | - | - | - | - | - | - |
| F4B-E-315R | DODGE | - | - | - | - | - | - | - | 466.725 mm |
| WSTU-SCM-204 | DODGE | - | - | - | - | - | - | - | - |
| P4B-IP-211RE | DODGE | - | - | - | - | - | - | - | - |
| WSTU-SCMED-200 | DODGE | - | - | - | - | - | - | - | - |
| FC-IP-115LE | DODGE | - | - | - | - | - | - | - | - |
| NSTU-SC-101 | DODGE | - | 2 | - | - | - | - | - | - |
| F2B-SCEZ-012-P | DODGE | - | - | - | - | - | - | M 80x2 | - |
| F4B-GTEZ-30M-PCR | DODGE | - | - | - | - | - | - | - | - |
| 5066 | DODGE | - | - | - | - | - | - | - | - |
| FC-IP-104L | DODGE | 736.6 mm | - | - | - | - | - | - | - |
| SP2B-S2-108R | DODGE | 225 mm | - | - | - | - | - | - | - |
| P4B534-ISAF-515R HYD | DODGE | - | - | - | - | - | - | - | - |
| F4B-SCEZ-106-SH | DODGE | - | - | 22.3 mm | - | - | - | - | - |
| P2B-LTB7-108 | DODGE | 920 mm | - | - | - | - | - | - | - |
| FC-IP-108R | DODGE | - | - | - | - | - | - | - | - |
| P4B517-TAF-300RE | DODGE | - | - | - | - | - | - | - | - |
| FC-SXR-200 | DODGE | - | - | - | - | - | - | - | - |
| DODGE 5066 Mounted Units & Inserts | Reference speed:1600 r/min; Da max.:276 mm; Calculation factor e:0.43; d:160 mm; T:52 mm; Calculation factor Y:1.4; Mass bearing:13.2 kg; Fatigue load limit Pu:72 kN; Dimension series:4GB; Basic dynamic load rating C:566 kN; |
| 1.375 Inch | 34.925 Millimeter x 3 Inch | 76.2 Millimeter x 2.375 Inch | 60.325 Millimeter DODGE P2B-DI-106RE Pillow Block Bearings | Tolerance housing:H7; D:105 mm; Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ min.:0.05; B:100 mm; d:80 mm; Mass bushing:2.24 kg; Permissible sliding velocity v min.:0.25 m/s; Specific static load factor K0:20 N/mm²; Coefficient of friction µ max.:0.1; Size (mm):1.375 Inch | 34.925 Millimeter x 3 Inch | 76.2 Millimeter x 2.375 Inch | 60.325 Millimeter ; |
| DODGE P2B-LTB7-108 Mounted Units & Inserts | D:920 mm; Mass bearing:139 kg; Da max.:902 mm; D1 ≈:867 mm; Fatigue load limit Pu:520 kN; s max.:8 mm; Calculation factor e:0.3; d1 ≈:810 mm; E:878 mm; Calculation factor Y:0.4; |
| DODGE FC-SC-207-FF Flange Block Bearings | ra max.:2 mm; db min.:85 mm; Permissible angular misalignment α:2.5 °; Calculation factor Y2:4.5; da max.:99 mm; Calculation factor e:0.22; r1,2 min.:2 mm; B:33 mm; Mass bearing + adapter sleeve:2.85 kg; Fatigue load limit Pu:1.25 kN; |
| DODGE F2B-SCEZ-012-P Flange Block Bearings | Lock nut:KMFE 16; G:M 80x2; Hydraulic nut:HMV 16 E; d:80 mm; B:18 mm; d1:70 mm; Mass adapter sleeve assembly:1 kg; d3:105 mm; B1:59 mm; |
| DODGE SFCN-IP-203RE Flange Block Bearings | Cap bolt, SAE grade:8; H:360.363 mm; L:628.65 mm; P120°:127 kN; Da:309.999 mm; Cap bolt recommended tightening torque:1220 N·m; S:4.763 mm; J1:107.95 mm; PG:1/4 NPT; A1:171.45 mm; |
| DODGE WSTU-SCM-204 Take Up Unit Bearings | ALP22:0; mass:141; LangID:1; KBRG:3661; e:0.47; D_:482.6; BET23:0; Y3:1; C_:269.875; Prod_Type3:TRBSR_FR_KVS_A; |
| DODGE F4B-DL-100 Flange Block Bearings | mass:6.45; B_:40; Prod_Type3:CRB_SR_NJ; DA_:28; da:143; ra:2.5; hidYobi:NJ226ET; TSR rpm:3400; C_conv:365000; Macha rpm:5000; |
| 0.75 Inch | 19.05 Millimeter x 1.156 Inch | 29.362 Millimeter x 1.313 Inch | 33.35 Millimeter DODGE P2B-SC-012-HT Pillow Block Bearings | H:222.25 mm; Cap bolt recommended tightening torque:515.2 N·m; da:76.2 mm; Initial grease fill:181.44 g; Cap bolt:2 x 3/4-10 UNC; Max. speed for Taconite seal:1050 r/min; S:4.763 mm; Housing:FSAF 617; Da:180 mm; L:387.35 mm; Size (mm):0.75 Inch | 19.05 Millimeter x 1.156 Inch | 29.362 Millimeter x 1.313 Inch | 33.35 Millimeter ; |
| 1.375 Inch | 34.925 Millimeter x 3 Inch | 76.2 Millimeter x 1.875 Inch | 47.63 Millimeter DODGE P2B-EXL-106RE Pillow Block Bearings | N1:35 mm; Q180°:900 kN; J1:130 mm; Appropriate attachment bolt, rec. tightening torque:1310 N·m; P0°:2600 kN; Adapter sleeve:H 2338; N4 max.:20 mm; End cover:ETS 40; L:610 mm; H:411 mm; Size (mm):1.375 Inch | 34.925 Millimeter x 3 Inch | 76.2 Millimeter x 1.875 Inch | 47.63 Millimeter ; |
| DODGE F4B-GT-15-LL Mounted Units & Inserts | Da min.:402 mm; r1,2 min.:4 mm; Limiting speed:1500 r/min; Basic dynamic load rating C:2160 kN; Mass bearing:70 kg; s1 max.:20 mm; Ca min.:1.7 mm; B:118 mm; d:300 mm; Misalignment factor k1:0.123; |
| 3.5 Inch | 88.9 Millimeter x 2.859 Inch | 72.619 Millimeter x 3.75 Inch | 95.25 Millimeter DODGE P2B-UN2-308E Pillow Block Bearings | B2:24.5 mm; r3,4 min.:3 mm; B1:12 mm; d1 ≈:194.8 mm; d:150 mm; Mass angle ring:1.35 kg; Size (mm):3.5 Inch | 88.9 Millimeter x 2.859 Inch | 72.619 Millimeter x 3.75 Inch | 95.25 Millimeter ; |
| DODGE WSTU-SCM-70M Take Up Unit Bearings | J1:69.85 mm; L:419.1 mm; Labyrinth ring:2 x LOR 101; Initial grease fill:765.45 g; End plug (suffix Y):EPR 12; P120°:72.5 kN; P90°:111 kN; Ca:82.804 mm; Stabilizing ring:2 x SR-1620; Bearing limiting speed:4000 r/min; |
| DODGE FC-IP-108R Flange Block Bearings | SDM_:181.5; C_conv:530000; Fw:153.5; db min:143; ra:2.5; dd min:168; KBRG:4165; db max:150; C0:735; rb:2.5; |
DODGE F4B-SC-60M Flange Block Bearings Video