| No. | Brand | D | r | b | s | J | w | G | L |
| F4B-VSC-111 | DODGE | 46 mm | - | - | - | - | - | - | - |
| F4B-VSC-111-NL | DODGE | 300 mm | - | - | - | - | - | - | - |
| P2B-GTB-207 | DODGE | 260 mm | - | - | - | - | - | - | - |
| F4B-E-315R | DODGE | - | - | - | - | - | - | - | 466.725 mm |
| INS-S2-106R | DODGE | - | - | - | - | - | - | M 50x1.5 | - |
| P2B-K-103R MOD | DODGE | - | - | - | - | - | - | - | - |
| H4S-338-USAF | DODGE | - | - | - | - | - | - | - | - |
| FC-IP-110LE | DODGE | 110 mm | - | - | - | - | - | - | - |
| F4B-VSC-107-NL | DODGE | - | - | - | - | - | - | - | - |
| P2B-C-303E | DODGE | - | - | - | - | - | 90 mm | - | - |
| P4B-IP-211RE | DODGE | - | - | - | - | - | - | - | - |
| P4B-IP-212RE | DODGE | - | - | - | - | - | - | - | - |
| P2B-GTB-25M | DODGE | - | - | - | - | - | - | - | - |
| P2B-DL-100-NL | DODGE | - | - | - | - | - | - | - | - |
| INS-IP-300L | DODGE | - | - | - | - | - | - | - | - |
| P2B-DLB-015 | DODGE | - | - | - | - | - | - | - | - |
| NSTU-LT10-012 | DODGE | - | - | - | - | - | - | Tr 670x6 | - |
| F4B-GT-15-LL | DODGE | - | - | - | - | - | - | - | - |
| F2B-SCEZ-100-PCR | DODGE | - | - | - | - | - | - | - | - |
| F2B-SCEZ-012-P | DODGE | - | - | - | - | - | - | M 80x2 | - |
| P4B17-SS-215 | DODGE | - | - | - | - | - | - | - | - |
| INS-DL-111-CR | DODGE | - | 2.1 | - | - | - | - | - | - |
| F4B-SCEZ-106-SH | DODGE | - | - | 22.3 mm | - | - | - | - | - |
| P2B-DLEZ-30M-SHCR | DODGE | - | 4 | - | - | - | - | - | - |
| P2B-GTM-207 MOD | DODGE | - | - | - | - | - | - | - | - |
| DODGE F4B-GT-07-NL Mounted Units & Inserts | B:25.4 mm; Hexagonal key size for grub screw N:4.763 mm; Recommended tightening torque for grub screw:16.5 N·m; s1:29.4 mm; D:72 mm; d1 ≈:46.1 mm; Limiting speed1):5300 r/min; Fatigue load limit Pu:0.655 kN; d2:51.1 mm; Basic dynamic load rating C:25.5 kN; |
| 6.5 Inch | 165.1 Millimeter x 7.391 Inch | 187.731 Millimeter x 7.5 Inch | 190.5 Millimeter DODGE P4B536-ISAF-608RE Pillow Block Bearings | Z_:16; C0:195; hidTable:ecat_NSCLDR; rb:2; D_:170; DE_:151.5; D_b min:155; SBRG:2; Prod_Type3:CRB_SR_NF; B_:32; Size (mm):6.5 Inch | 165.1 Millimeter x 7.391 Inch | 187.731 Millimeter x 7.5 Inch | 190.5 Millimeter ; |
| DODGE NSTU-DL-100 MOD Take Up Unit Bearings | Specific static load factor K0:45 N/mm²; D:45 mm; a:3 mm; Tolerance housing:H7; h:36 mm; α:124 °; d:35 mm; Permissible sliding velocity v max.:0.5 m/s; Specific dynamic load factor K:25 N/mm²; Coefficient of friction µ max.:0.15; |
| 3.188 Inch | 80.975 Millimeter x 7 Inch | 177.8 Millimeter x 5.5 Inch | 139.7 Millimeter DODGE P2B-C-303E Pillow Block Bearings | d2 max.:182 mm; w:90 mm; B:55 mm; Mass rod end:15 kg; α:6 °; Basic dynamic load rating C:400 kN; r1 min.:1 mm; Basic static load rating C0:655 kN; l7 min.:88 mm; d4 ≈:105 mm; Size (mm):3.188 Inch | 80.975 Millimeter x 7 Inch | 177.8 Millimeter x 5.5 Inch | 139.7 Millimeter ; |
| DODGE WSTU-SC-50M Take Up Unit Bearings | P150°:80.1 kN; Stabilizing ring:SR-30-0; J max.:463.55 mm; ba:77.787 mm; PG:1/4 NPT; Bearing limiting speed:2200 r/min; R1:95.25 mm; Adapter sleeve assembly:SNW 130x5.3/8; Labyrinth ring:2 x LOR 128; Eye bolt:2 x 3/8-16 UNC; |
| 2.438 Inch | 61.925 Millimeter x 5.203 Inch | 132.156 Millimeter x 3.25 Inch | 82.55 Millimeter DODGE P2B515-USAF-208TTAH Pillow Block Bearings | Reference speed:90 r/min; Fatigue load limit Pu:3150 kN; Minimum axial load factor A:270; r1,2 min.:7.5 mm; d1:1240 mm; Mass bearing:805 kg; ra max.:6 mm; Limiting speed:180 r/min; Da max.:1000 mm; D:1250 mm; Size (mm):2.438 Inch | 61.925 Millimeter x 5.203 Inch | 132.156 Millimeter x 3.25 Inch | 82.55 Millimeter ; |
| DODGE F4B-E-315R Flange Block Bearings | L:466.725 mm; R1:79.375 mm; P150°:118 kN; PG:1/4 NPT; Cap bolt:3/4-10 UNC; R2:36.513 mm; da:111.125 mm; Bearing:22226 EK; h:60.325 mm; Pa:24.9 kN; |
| DODGE INS-DL-20M Insert Bearings Spherical OD | Cap bolt recommended tightening torque:149.1 N·m; P180°:17.8 kN; J max.:241.3 mm; End plug (suffix Y):EPR 5; RG:1/4 NPT; Bearing:22311 EK; Housing:SAF 611; H2:30.163 mm; P90°:25.8 kN; Mass pillow block:13.7 kg; |
| 1.125 Inch | 28.575 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.625 Inch | 41.275 Millimeter DODGE P2B-SCAH-102 Pillow Block Bearings | B:12.5 mm; F:12 mm; r, r1,2 min.:0.3 mm; Mass inner ring:0.0059 kg; d:8 mm; Size (mm):1.125 Inch | 28.575 Millimeter x 1.391 Inch | 35.331 Millimeter x 1.625 Inch | 41.275 Millimeter ; |
| 3.438 Inch | 87.325 Millimeter x 4.016 Inch | 102 Millimeter x 3.75 Inch | 95.25 Millimeter DODGE P4B-S2-307LE Pillow Block Bearings | Housing:SYWK 504 Y; A:32 mm; Basic static load rating C0:6.55 kN; J max.:101 mm; A5:26.3 mm; Mass bearing unit:0.27 kg; N:17.5 mm; H2:16 mm; End cover:ECW 204; A1:21 mm; Size (mm):3.438 Inch | 87.325 Millimeter x 4.016 Inch | 102 Millimeter x 3.75 Inch | 95.25 Millimeter ; |
| DODGE 37656 Mounted Units & Inserts | J max.:279.4 mm; PosiTrac Plus contact element:2 x B10724-53; Cap bolt recommended tightening torque:149.1 N·m; J min.:250.825 mm; PG:1/8 NPT; Housing:FSAF 517; L:330.2 mm; Bearing:1217 K; N1:19.05 mm; ba:31.75 mm; |
| DODGE FB-SCM-111 MOD Flange Block Bearings | Reference speed:7000 r/min; Ba min.:9 mm; D1 ≈:79 mm; K:3 mm; Da max.:83 mm; d2 ≈:60 mm; d1:45 mm; D:90 mm; r1,2 min.:1.1 mm; Calculation factor Y2:4.2; |
| DODGE F4B-SC-010L-HT Flange Block Bearings | B5:125 mm; G3:13 mm; B:100 mm; d1:900 mm; Mass adapter sleeve assembly:409 kg; B1:420 mm; A:10 mm; Lock nut:HME 30/950; d:950 mm; Hydraulic nut:HMV 190E; |
| DODGE FC-SC-207-FF Flange Block Bearings | ra max.:2 mm; db min.:85 mm; Permissible angular misalignment α:2.5 °; Calculation factor Y2:4.5; da max.:99 mm; Calculation factor e:0.22; r1,2 min.:2 mm; B:33 mm; Mass bearing + adapter sleeve:2.85 kg; Fatigue load limit Pu:1.25 kN; |
5.938 Inch | 150.825 Millimeter x 9.26 Inch | 235.204 Millimeter x 7.063 Inch | 179.4 Millimeter DODGE P4B534-ISAF-515R HYD Pillow Block Bearings Video